Installation Overview - Cisco
The M12 nut must be tightened with a tightening torque from 0.6 Nm (hand- tight) to 1.5 Nm (using a torque wrench). An excessive tightening can damage the M12 ...
Ex-e/i Cable Glands - MaluxStep 5. Assemble the mounting arm to the flanges. Use a wrench to tighten all screws and nuts. Step 6. Ensure that the antenna cannot rotate about the mast. 00 Cover and plastic glands.aiOn all 160mm and 200mm bore ISO mounting styles except TB and TD, the gland retainer is separately bolted to the head, as shown. Thread Styles 4 & 7. The ... TD OPTISONIC 6300 v2.bookThe spacing between the cable glands is such that a torque wrench can be used to secure the gland bodies of the cable and conductor entries in the enclosure ...
Autres Cours:
