Bimed-2016.pdf
1 Split gland as shown. 2 Fit Entry Body, allowing for any installation accessories, and fully engage the thread into the equipment. Hand-tighten, then suitably.
Installation Overview - CiscoThe M12 nut must be tightened with a tightening torque from 0.6 Nm (hand- tight) to 1.5 Nm (using a torque wrench). An excessive tightening can damage the M12 ... Ex-e/i Cable Glands - MaluxStep 5. Assemble the mounting arm to the flanges. Use a wrench to tighten all screws and nuts. Step 6. Ensure that the antenna cannot rotate about the mast. 00 Cover and plastic glands.aiOn all 160mm and 200mm bore ISO mounting styles except TB and TD, the gland retainer is separately bolted to the head, as shown. Thread Styles 4 & 7. The ...
Autres Cours:
