Standard Serial to Fiber Optic Converters - Advantech

TD-277R-SM RS-232 to Single-mode Fiber Converter is a professional design in order to solve the RS-232 serial signals and single-mode fiber optic signals ...







FOI-6010 / TD-6010 - Fiberplex Technologies
These products and services not only control individual machines but integrate the manufacturing process, while providing access to vital plant floor data that.
Generic Requirements for Ethernet Media Converter
The I-2541 is an RS-232/422/485 to fiber optic converter that secures data transmission by using fiber optic transmission to provide immunity from EMI/RFI ...
1771-2.90-DU1, Fiber-Optic Converter Module Documentation Update
Operating as an RS-232 to. RS-422 interface converter, the Model 365 converts full- duplex data (TD and RD) between RS-232 and RS-422. As an RS-232 to RS-485 ...
4.7. RS-232/422/485 to Fiber Optic Converter - ICP DAS
It is designed to extend the distance of a network by converting Fast Ethernet data between twisted pair cabling and multi-mode or single-mode fiber-optic.
TELEBYTE RS 232/485 Converter Connection To ABB Protective ...
The LRW-102 is a fibre optic modem designed for multidrop and redundant ring applications. It acts as a repeater between the two fibre optic links and as a ...
LONWORKS®Fiber Optic Converter - Capelon
Fiber optic converter with integrated optical diagnostics, for DeviceNet?, CAN, CANopen® up to. 1000 kbps, termination device, interfaces: 1 x CAN, 1 x Alarm ...
PSI-MOS-DNET/FO 850 E - RS Components
A 6 position wiring harness and included power adapter provide, not just 9 VDC power, but a positive earth ground to the modules via 3 position Phoenix? locking.
Industrial Serial to Fiber Optic Converters - Papouch.com
This allows one serial device to communicate with up to 31 other devices around a fiber ring. Since it supports mixed standards, you can replace other ...
RS-232 to RS-485/422 High Speed Optic-isolation Converter Model ...
The MWE485-TD converts RS232 to RS485/422 with 2500V optical isolation, high rate, and automatic transmission, supporting 300-115.2Kbps baud rate.
The CAN Repeater with Optical Fiber Link - CAN/CiA
Each repeater can connect a CAN cable. Fig 4 shows the configuration of the optical repeater, which consists mainly of a CAN driver 80C250, an E/O converter.
CANFB - Datasheet - CAN Copper to Fiber Converter
The Model CANFB converter is used in pairs, one for each side of the fiber. The CAN side is connected to the system through terminal blocks. The fiber is ...
Industrial Serial to Fiber Optic Converters - Integral System
This allows one serial device to communicate with up to 31 other devices around a fiber ring. Since it supports mixed standards, you can replace other ...