CABLE GLANDS for Industrial Application Polyamide
- Firstly, the gland body must be mounted to the enclosure. - The body or the lock nut must be tightened according to torque indicated on the instruction chart.
Cable-Glands-ATEX-IECEX-DNV-GL.pdf - Atexxo ManufacturingHexagon nuts for most cable gland sizes are of the same size. (SW). Fewer wrench sizes are required. G. Cable glands are deluge proof because of two o-rings (6) ... Bimed Cable Glands - AutomationDirectA cable gland, commonly known as a cable connector or fitting, is a device designed to attach and secure the end of a cable to electrical equipment. CCG Cable GlandsPass the outer nut ? and the body ? over the cable. 6. Tighten the body ? onto the inner ? until hand tight, then tighten with a CCG Spanner ? with ¾ turn to ...
Autres Cours:
